Stones Treatment
Polished Surface | Polished Surface |
![]() MGT27 - MGT27K - MGP25 Treatments for anti oil polished marble and granite. Yield: 1 litre for 12 - 15 square meters. Use: Apply directly on the surface to be treated, with a draw making circular motions until the product is not drying under the rag. If you read alonature opaque, polishing with iron paglietta end. Warning: Do not apply on wet surfaces. Before treatment clean the surface from dirt and wax residue. On the marble polished product does not protect from substances that create acid content read corrosion. Treatment ecologic anti oil for marble, granite and agglomerations transparencies. Protects the shiny surfaces of marble and granite macchianti substances such as oil, coffee, fatty. Yield: 1 litre for 12 - 15 square meters. Use: MGT 27K apply directly on the surface gloss, stretch uniformly making circular movements, in the case of highly absorbent surfaces apply 2 consecutive hands. A complete drying, the area will be protected, without changes in color and without residue. On marble or granite little absorbent can be a light residue which you delete with a simple cloth or lucidatrice. Detergent cleaning maintenance with strong power degreasing floor kitchens, restaurants, marble and granite flooring in porcelain and natural stone, agglomerates. Yield: 1 litre for 10 - 15 square meters. Use for dirt slight 1 litre of MGP 25 in 18-20 litres d' water. For dirt resistant 1 litre of MGP 4-5 in 25 litres d 'water. Pour the solution directly on the pavement or coating, let it work for 5-10 minutes, wipe with brush, if pulizaia is manual or with a single and eventually draw with aspiraliquidi. Rinse with water. On coatings wash using a sponge. On rough surfaces, in order to clean all the interstices of the stone, use brush in tynex adattta for this type of cleaning. Treatment for anti bottom marble, granite and agglomerations transparencies. Yield: 1 litre for 12 - 15 square meters. Use: Apply directly on the surface gloss, stretch uniformly making circular movements, in the case of highly absorbent surfaces apply 2 consecutive hands. A complete drying, the area will be protected, without changes in color and without residue.
|